Enrolling New Admin, Supervisor or Enroller with Password Only

To enroll a new Admin, Supervisor or Enroller with just a password, Press ‘MENU’ on the keypad. This will bring up the menu below. Note that the administrator will need to verify their identity with their fingerprint to access this menu.

‘User Manage’ is selected. Press ‘OK’.

 

Arrow down to select ‘Enroll Admin’ in the ‘User Manage’ Menu. Press ‘OK’.

 

 

Arrow down once to select ‘Enroll Pwd’ and press ‘OK’.

 

‘Admin’ is automatically selected. If you would like to enroll a Supervisor or Enroller, arrow down until your choice is highlighted, and press ‘OK’.

To confirm new enroll, press ‘OK’.

 

The next available User ID number will automatically be selected. You can also enter in a number (the range is 1 through 65534). Press ‘OK’.

 

 

Input a password of up to 5 numbers and press ‘OK’.

 

Re-enter the password to confirm and press ‘OK’.

 

Press ‘OK’ to Save the new password enrollment.

 

If you would like to enter another new password enrollment, press ‘OK’, otherwise, press ‘ESC’.